Additional Information For Hob Quote
Name 
Designation 
Company Name 
Address 
Tel.
Fax
E-mail
For Repeat Order No. Kindly give Tool No.
Tool Number etched on the our HOB.
New Order
Hobbing Machine to be used.
RPM of the HOB
Feed range available
Arbor size / Shank
details of the HOB
To Establish the HOB SPECIFICATIONS, pls. give the following details.
General Information
Normal
Normal - Pressure Angle
Hand.
Flutes ( Gashes )
Number of Starts.
Type of Feed
Sharpening
Class
Tooth form :
Others
Stock required per flank
Physical Dimensions
Arbor Type
Length ( Over Hubs )
Outside Diameter.
Inside / Diameter.
Keyway
Taper (If Any ) when HOB is Top Comming,
large end of hole is right or left.
Shank Type
Length ( Active Face )
Outside Diameter.
Shank Taper if any.
Locating Point( Dimensions from Shank Collar
to Center of active face )
Pilot Length.
Pilot Diameter.
Shank Tapped Hole if required.
Rotation of HOB in relation to Driving Shank.
Any Additional Requirement :
Thank you for registering your presence & showing your interest.
 
* Pls. Courier or Fax blue print of the Gear to be Cut. / blue print of the matching Gear
Link to Home